|
|
 |
| Software |
Before proceeding with
a firmware upgrade, please contact
Customer Service at 215.723.0275
for additional information. |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Field Probe Demo Software
This free demo program allows a user to read and display the composite field measurement from a single 7000 Series field probe using an RS-232 connection.
PC Requirements: Windows XP only
AR Probe Demo Program version 2.20
|
|
|
|
CI Control Software Patch
This patch updates the power meter drivers for V2.3.3 of the CI Control Software. Installation instructions are available in the Readme (V2.3.3 Patch 1).txt file contained in download Zip file. Contact AR RF/Microwave Instrumentation Customer Service for additional information.
CI Control Software Patch 1 version V 2.3.3
|
|
|
|
Display Firmware
Compatible with the following amplifier models: 15S1G4, 30S1G4, 60S1G4, 120S1G4, 240S1G4, 10S1G4B, 10S4G11A, 15S1G4, 15S4G8A, 20S4G11A, 25S1G4B, 30S4G8A, 40S4G11, 60S4G8, 80S4G11, 120S4G8, 5S6G18A, 10S6G18A, 20S6G18, 350AH1, 500A225, 500A250A, 800A3, 800A3A, 1000A250, 1500A3, 2500A225, 5000A225
PC Requirements: USB 2.0 port, Windows XP only
Changes in version 1.70
1.) Changed splash screen from orange bar to AR logo.
Display Code Upgrade Installer version 1.70
|
|
|
|
Table Loader Software
This program allows a user to write and read field probe correction factors to and from an FM7004. It is compatible with FM7004 firmware versions 2.10 and newer.
PC Requirements: USB 2.0 port, Windows XP only
FM7004 Table Loader Program version 1.50
|
|
|
|
Model FM7004 Firmware
Compatible with the following models: FM7004
PC Requirements: USB 2.0 port, Windows XP only
Changes in version 2.20
1.) Adds the ability to work with the new FL7040 and FL7060 field probes.
2.) Fixes a bug with the Frequency Range indicators so that they now only appear when frequency correction is enabled.
3.) Fixed a bug with the push buttons. Buttons are now completely disabled in remote mode as intended.
4.) Fixed issue of FM7004 occasionally booting into remote mode.
FM7004 Upgrade Installer version 2.20
|
|
|
|
|
|
|
|
IO Firmware
Compatible with the following product models: 15S1G4, 30S1G4, 60S1G4, 120S1G4, 240S1G4, 10S1G4B, 10S4G11A, 15S1G4, 15S4G8A, 20S4G11A, 25S1G4B, 30S4G8A, 40S4G11, 60S4G8, 80S4G11, 120S4G8, 5S6G18A, 10S6G18A, 20S6G18, 40S6G18, 350AH1, 500A225, 500A250A, 800A3, 800A3A, 1000A250, 1500A3, 2500A225, 5000A225, FM7004
PC Requirements: USB 2.0 port, Windows XP only
Changes in version 2.40
1.) Added ability to pass serial number and IO board firmware revision to control panel where control panel firmware supports this feature.
2.) Added ability to handle 8 digit serial numbers.
NOTE: Only products containing IO Board assemblies that were shipped with firmware revisions 2.00 or newer will support this update.
To determine your IO Board firmware revision use the *IOB?\n query.
IO Code Upgrade Installer version 2.40
|
|
|
|
SW1006 Software Patch V1.1 - 052110
This patch is for SW1006 version 1.4 ONLY. It includes updated equipment drivers for this release.
SW1006 V1.4 Patch version V1.1
|
|
|
|
VM7000 Software Upgrade
This upgrade is available by request only and requires serial number proof of purchase.
VM7000 version 3.1 Requires Authorization. Follow link to submit request.
|
|
|
|
|
 |
 |
 |
 |
|
|
